What To Do If Your Water Heater Suddenly Stops Working
What To Do If Your Water Heater Suddenly Stops Working
Blog Article
They are making several great pointers related to What Would Cause My Electric Water Heater to Stop Working? overall in this post beneath.
Several modern houses use an electrical water heater for their heating unit, as a result of its benefit as well as convenience of use. Nevertheless, similar to any other electrical home appliances, troubles may occur with its use, unexpectedly. It can be truly irritating to wake up to a chilly shower as opposed to a warm one or having your bath with water that isn't hot adequate or even too warm. Whatever the instance may be, water heater issues can be rather nerve-racking. Luckily, we've made a listing of feasible options to your hot water heater concerns. There are a number of factors that could cause a number of these issues, maybe a problem with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you shut off the primary power supply for safety and security. Whatever the trouble is, getting it fixed ought to not position excessive of a concern if you adhere to these steps:
Call A Professional:
If after replacing all defective parts and resetting your temperature, the water heater still isn't working, you might require to speak to a specialist plumber for a specialist point of view. The trouble with your heating unit could be that the cold and hot taps have been switched or it may be undersized for the quantity of warm water required in your house. Whatever the situation may be, a professional plumber would aid address the issue.
Check Your Power Supply:
As fundamental as this may appear, it is extremely necessary. Without appropriate power, your water heater will certainly not work. So the first thing to do when your water suddenly retires is to confirm that it isn't a power trouble. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the issue, just turn it on and off again. Change any busted or worn-out fuse. Check the appliance with power after these adjustments to see if it's now functioning.
Check Your Thermostat:
If your hot water heater still isn't working or the water appearing isn't hot enough, you might need to examine the temperature setups on your upper thermostat. Make sure the circuit breaker is switched off prior to doing anything. Open the accessibility panel and press the red switch for temperature reset above the thermostat. This need to help warm the water. Turn the circuit breaker back on and also check if the issue has been fixed.
Examine the Heating Element in the Hot Water Heater:
If it's not a power trouble, then attempt checking out your heating element if it is still functioning. Examine each of your heating elements to make sure the trouble isn't with any of them. If any of them is malfunctioning, change that part and afterwards check whether the hot water is back on.
Verdict
Water heater issues are not constantly major. Much of them are due to small concerns like a blown fuse or worn-out burner. Changing the defective components should work. Nonetheless, if you are still incapable to solve the issue, give a call to your local plumber to come to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed reading our piece on How to Troubleshoot and Repair an Electric Water Heater. Thanks a ton for taking the time to read our blog. Do you know about somebody who is truly interested in the subject? Feel free to share it. Thanks a bunch for your time. Come back soon.
Book A Service Call
Report this page